Builder's Risk Insurance for Florida Contractors | Acolite Insurance
Builder's risk insurance for Florida construction projects
Florida builder's risk coverage is dominated by hurricane, named-storm, flood, water-intrusion, and theft exposure. Coastal and South Florida projects can carry separate wind or named-storm deductibles, and flood is commonly excluded unless specifically endorsed. Lenders and project owners usually require coverage for the completed value of the work before construction starts.
What makes Florida different for builder's risk.
Named-storm deductibles
Florida builder's risk policies often carry separate wind or named-storm deductibles. The deductible may be a percentage of the insured value rather than a flat dollar amount.
Flood is a separate question
A standard builder's risk policy may exclude flood, storm surge, and rising water. Coastal and FEMA-zone projects should address flood before closing construction financing.
Water intrusion and mold
Florida projects face water-intrusion and mold allegations after storms or failed envelope work. Policy exclusions and water-damage sublimits need review.
How builder's risk is priced in Florida.
Rates vary meaningfully by state because class codes, litigation climate, medical costs, and regulatory requirements all differ. Here's the Florida picture.
Florida builder's risk rates are much more sensitive than most states. Coastal counties, wood-frame construction, long project duration, and hurricane-season starts increase pricing and reduce market appetite. Security, water-damage mitigation, site elevation, and lender-required soft-cost coverage all affect terms.
Florida regulator
Florida Office of Insurance Regulation
Priority trades in Florida
general contractor · roofer · handyman · electrician
What Florida GCs usually ask for before work starts.
State law is only one part of the buying decision. Commercial contracts often impose stricter insurance requirements than the legal minimum.
Additional insured status
GCs and owners commonly require additional insured wording before you can start work on a project.
Primary and non-contributory wording
Your policy may need to respond before the GC or owner policy contributes. We match the endorsement to the contract schedule.
Waiver of subrogation
Many contracts require your carrier to waive recovery rights against the GC or owner after a covered claim.
Completed operations
For construction work, contracts often require completed-operations protection after the job is done, not just while work is underway.
What to send before quoting builder's risk in Florida.
The fastest quotes come from clean underwriting data. These are the items competitors often hide behind a generic form.
- Legal business name and FEIN
- Primary trade and operations description
- States where work is performed
- Current declarations pages and loss runs if available
- Any GC or owner insurance schedule you need to satisfy
- Annual revenue and subcontractor cost
- Certificate holder and additional insured wording requested
- Project types, height exposure, hot work, or residential/commercial split
What builder's risk covers for Florida contractors.
Core coverage is the same nationwide. Florida-specific regulations layer on top of these baseline protections.
The structure under construction
The partially built structure itself. Framing, sheathing, interior finishes, all covered up to the limit you select, which should equal the total completed value.
Materials on the job site
Lumber, drywall, fixtures, and all materials delivered to the site but not yet installed. Includes materials in temporary storage containers or yards.
Materials in transit
Most forms cover materials while being delivered from supplier to site, limited to a sub-limit, typically $50K-$100K. Critical for high-value systems like HVAC or elevators.
Fire, lightning, explosion
Standard named-peril coverage. Fire is the #1 total-loss driver during construction; a single event can level an 80%-complete building overnight.
Theft & vandalism
Theft of copper, HVAC units, appliances, and tools from the site. Vandalism to work in progress. Active construction sites are prime targets; this coverage is not optional.
Wind, hail, and storm damage
Covered on most forms, with a separate wind/hail deductible in catastrophe-prone states (typically coastal FL, TX, LA, SC). Named-storm deductibles are a separate class.
How much does builder's risk cost in Florida?
Typical premium: 1% - 3% of hard costs
National baseline range. Florida adjustments above. A typical $2M new-construction project on a 12-month build-out runs $6,000 - $40,000 in BR premium depending on construction type, state, and deductible. Wood-frame multi-family in a catastrophe-prone state is the upper end; steel-frame commercial in a mild region is the lower end.
| Factor | Impact | Detail |
|---|---|---|
| Construction value | Major | Rate is a percentage of the total completed value. Premium scales linearly with project size. |
| Construction type | Major | Wood-frame (Joisted Masonry) is 2-4x the rate of non-combustible (steel/concrete). Frame multi-family is the toughest to place. |
| Project duration | Major | Longer project = more exposure. Standard term is 12 months; each month extension adds premium. |
| Geographic risk | Moderate | Hurricane-zone Florida, wildfire-exposed California, tornado alley, all carry loaded rates and larger deductibles. |
| Site security | Moderate | Fencing, security cameras, and guards meaningfully reduce theft claims; carriers reward it with credits. |
| Deductible selection | Moderate | Higher deductibles ($25K vs $5K) can drop premium 10-20%. Match the deductible to what the owner / GC contract allows. |
| Contractor experience | Minor | New builders pay more. Five+ years of clean BR claim history unlocks preferred rates. |
Questions contractors ask about builder's risk in Florida.
Q.01 Does Florida builder's risk cover hurricane damage?
It can, but the policy may apply a separate wind or named-storm deductible and may restrict coastal projects. We review the deductible and wind wording before bind.
Q.02 Does Florida builder's risk cover flood or storm surge?
Not automatically. Flood and storm surge are commonly excluded unless specifically endorsed or placed through a separate flood policy.
Q.03 What does builder's risk insurance cover?
Builder's risk covers the structure under construction, materials on-site, and (with sub-limits) materials in transit. Standard perils include fire, wind, hail, theft, vandalism, and water damage. Flood and earthquake require separate endorsements in exposed regions.
Q.04 How much does builder's risk insurance cost?
Premium is typically 1% - 3% of the total completed construction value, spread over the project term. A $2M wood-frame build might run $20,000; a $2M steel-frame commercial build might run $8,000. Construction type, state, and deductible are the biggest drivers.
Q.05 Who buys builder's risk, the GC or the owner?
Contract language governs. On many projects, the GC buys and names the owner as additional insured. On some, especially larger commercial and multi-family, the owner buys and names the GC. Always read the contract before quoting so limits and buyer match the requirement.
Q.06 Does builder's risk cover my tools and equipment?
No. BR is for the project, not the contractor's property. Tools, heavy equipment, trailers, and scaffolding belong on an inland marine or contractor's equipment policy. We bundle both lines when it makes sense.
Q.07 Can builder's risk cover renovation projects in occupied buildings?
Yes, but it needs renovation-specific endorsements; standard new-construction BR forms don't fit. Renovation BR treats the existing structure differently and requires careful underwriting. Not every carrier writes it.
Q.08 What is a delay in startup (DSU) endorsement?
DSU (sometimes called soft-cost or delay-in-completion) covers lost rental income, extended loan interest, and other soft costs that accrue if a covered loss delays completion. Standard BR doesn't include these; DSU is a separate, carefully-underwritten add-on that most lenders require on commercial projects.
Q.09 When does the builder's risk policy end?
At the earliest of: completion + final inspection, occupancy of the building, expiration of the policy term, or abandonment. After that, property insurance takes over. Timing the handoff matters; lapses create gaps.
Q.10 Is flood covered on builder's risk?
Standard forms exclude flood. If your project is in a FEMA flood zone or a coastal area, you need a flood endorsement or a separate flood policy through NFIP or the E&S market. Flood endorsements for active construction are limited and often expensive; plan early.
Q.11 Can I get a COI for builder's risk quickly?
Once bound and holder details are available, we typically issue BR COIs in under 60 seconds. If a project is starting Monday and you need proof of BR by Friday, call us Thursday; bind time varies by carrier and complexity but 1-2 days is typical.
Q.12 What if the project runs past the 12-month term?
Extensions are available but need to be requested before expiration. Post-expiration, coverage stops; any loss after the term is not covered. Carriers charge a pro-rata additional premium for extensions, and sometimes re-underwrite if the project has materially changed.
Other coverages Florida contractors might need.
Most jobs require more than one policy. Round out your insurance program with the coverages GCs, owners, and lenders commonly ask contractors to carry.
General Liability
General Liability insurance for Florida contractors
Workers' Comp
Workers' Comp insurance for Florida contractors
Commercial Auto
Commercial Auto insurance for Florida contractors
Umbrella & Excess
Umbrella & Excess insurance for Florida contractors
Ready to get covered
Quote your Florida builder's risk against 10+ carriers.
Tell us your trade. We typically send quote options in 2 hrs after we have the required information. No fee. No obligation.